SmartSolo IGU-16HR 3C contains an electromagnetic conversion system that generates millivolt signals proportional to the vibration intensity of the measured medium (usually soil).Three channel moving coil sensor with orthogonal configuration is built in to restore multi direction seismic signal without distortion.The sensor is rigidly connected with the ground through the metal tail vertebrae. The vibration of the earthquake drives the internal coil of the sensor to move around the magnet, and the magnetoelectric conversion occurs, and the coil generates the induced electromotive force;We provide GPS clock signal to ensure the real and effective value of each sample point. The temperature sensor can accurately measure the temperature and correct the error caused by temperature, so as to achieve the pursuit of high-precision data quality.
Seismic Data Loggers | |
(@ 2ms sample interval, 31.25 Hz, 25℃, unless otherwise indicated) | |
ADC resolution | 24 bits |
Sample intervals | 0.25, 0.5, 1, 2, 4 ms |
Preamplifier Gain | 0dB to 36 dB in 6 dB steps |
Anti-alias Filter | 206.5 Hz @ 2ms (82.6%of Nyquist) Selectable - Linear Phase or Minimum Phase |
DC blocking filter | 1Hz to 10Hz, 1Hz increments or DC Removed |
Seismic data channel | 3 |
Waterproof | IP68 |
Charging Temperature Range | +3˚C ~ +40˚C |
Equivalent Input Noise | 0.18 μV 2ms Gain 18dB(Typical) |
Instantanteous Dynamic Range | 125dB@ 2ms Gain 0dB |
Total Harmonic Distortion | <0.0002%@ Gain 0dB |
Common Mode Rejection | >100dB |
Gain Accuracy | <0.5% |
Data Storage | 32GB(can be expanded to 64GB) |
Sensor Specifications | |
DT-SOLO 5Hz | |
Natural Frequency | 5Hz |
Coil Resistance | 1850Ω |
Damping | |
Open Circuit Damping | |
Damping | 0.7 |
Sensitivity | 76.7V/m/s (1.95 V/in/s) |
Recharge Time | < 3.5 hours |
Distortion | <0.1%@12Hz, (0° ~ 10°)V tilt. / <0.15%, (0°~3°) H tilt" |
Remark | All parameters are specified at +22℃in the vertical position unless otherwise stated. |
SmartSolo Inc. reserves the right to revise the information at any time without prior notice.
We will send the file to your email address within 3 workdays
Get files